# Security Analysis

## Operational Context

This system runs on a UAV operating in a **conflict zone** (eastern Ukraine). The UAV could be shot down and physically captured. GPS denial/spoofing is the premise. The Jetson Orin Nano stores satellite imagery, flight plans, and captured photos. Security must assume the worst case: **physical access by an adversary**.

## Threat Model

### Asset Inventory

| Asset | Sensitivity | Location | Notes |
|-------|------------|----------|-------|
| Captured camera imagery | HIGH | Jetson storage | Reconnaissance data — reveals what was surveyed |
| Satellite tile cache | MEDIUM | Jetson storage | Reveals operational area and areas of interest |
| Flight plan / route | HIGH | Jetson memory + storage | Reveals mission objectives and launch/landing sites |
| Computed GPS positions | HIGH | Jetson memory, SSE stream | Real-time position data of UAV and surveyed targets |
| Google Maps API key | MEDIUM | Offline prep machine only | Used pre-flight, NOT stored on Jetson |
| TensorRT model weights | LOW | Jetson storage | LiteSAM/XFeat — publicly available models |
| cuVSLAM binary | LOW | Jetson storage | NVIDIA proprietary but freely distributed |
| IMU calibration data | LOW | Jetson storage | Device-specific calibration |
| System configuration | MEDIUM | Jetson storage | API endpoints, tile paths, fusion parameters |

### Threat Actors

| Actor | Capability | Motivation | Likelihood |
|-------|-----------|------------|------------|
| **Adversary military (physical capture)** | Full physical access after UAV loss | Extract intelligence: imagery, flight plans, operational area | HIGH |
| **Electronic warfare unit** | GPS spoofing/jamming, RF jamming | Disrupt navigation, force UAV off course | HIGH (GPS denial is the premise) |
| **Network attacker (ground station link)** | Intercept/inject on UAV-to-ground comms | Steal position data, inject false commands | MEDIUM |
| **Insider / rogue operator** | Authorized access to system | Data exfiltration, mission sabotage | LOW |
| **Supply chain attacker** | Tampered satellite tiles or model weights | Feed corrupted reference data → position errors | LOW |

### Attack Vectors

| Vector | Target Asset | Actor | Impact | Likelihood |
|--------|-------------|-------|--------|------------|
| **Physical extraction of storage** | All stored data | Adversary (capture) | Full intelligence compromise | HIGH |
| **GPS spoofing** | Position estimate | EW unit | Already mitigated — system is GPS-denied by design | N/A |
| **IMU acoustic injection** | IMU data → ESKF | EW unit | Drift injection, subtle position errors | LOW |
| **Camera blinding/spoofing** | VO + satellite matching | EW unit | VO failure, incorrect satellite matches | LOW |
| **Adversarial ground patterns** | Satellite matching | Adversary | Physical patches on ground fool feature matching | VERY LOW |
| **SSE stream interception** | Position data | Network attacker | Real-time position leak | MEDIUM |
| **API command injection** | Flight session control | Network attacker | Start/stop/manipulate sessions | MEDIUM |
| **Corrupted satellite tiles** | Satellite matching | Supply chain | Systematic position errors | LOW |
| **Model weight tampering** | Matching accuracy | Supply chain | Degraded matching → higher drift | LOW |

## Per-Component Security Requirements and Controls

### 1. Data at Rest (Jetson Storage)

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Protect captured imagery from extraction after capture | CRITICAL | Full-disk encryption (LUKS) | JetPack LUKS support with `ENC_ROOTFS=1`. Use OP-TEE Trusted Application for key management. Modify `luks-srv` to NOT auto-decrypt — require hardware token or secure erase trigger |
| Protect satellite tiles and flight plans | HIGH | Same LUKS encryption | Included in full-disk encryption scope |
| Enable rapid secure erase on capture/crash | CRITICAL | Tamper-triggered wipe | Hardware dead-man switch: if UAV telemetry lost for N seconds OR accelerometer detects crash impact → trigger `cryptsetup luksErase` on all LUKS volumes. Destroys key material in <1 second — data becomes unrecoverable |
| Prevent cold-boot key extraction | HIGH | Minimize key residency in RAM | ESKF state and position history cleared from memory when session ends. Avoid writing position logs to disk unless encrypted |

### 2. Secure Boot

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Prevent unauthorized code execution | HIGH | NVIDIA Secure Boot with PKC fuse burning | Burn `SecurityMode` fuse (odm_production_mode=0x1) on production Jetsons. Sign all boot images with PKC key pair. Generate keys via HSM |
| Prevent firmware rollback | MEDIUM | Ratchet fuses | Configure anti-rollback fuses in fuse configuration XML |
| Debug port lockdown | HIGH | Disable JTAG/debug after production | Burn debug-disable fuses. Irreversible — production units only |

### 3. API & Communication (FastAPI + SSE)

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Authenticate API clients | HIGH | JWT bearer token | Pre-shared secret between ground station and Jetson. Generate JWT at session start. Short expiry (flight duration). `HTTPBearer` scheme in FastAPI |
| Encrypt SSE stream | HIGH | TLS 1.3 | Uvicorn with TLS certificate (self-signed for field use, pre-installed on ground station). All SSE position data encrypted in transit |
| Prevent unauthorized session control | HIGH | JWT + endpoint authorization | Session start/stop/anchor endpoints require valid JWT. Rate-limit via `slowapi` |
| Prevent replay attacks | MEDIUM | JWT `exp` + `jti` claims | Token expiry per-flight. Unique token ID (`jti`) tracked to prevent reuse |
| Limit API surface | MEDIUM | Minimal endpoint exposure | Only expose: POST /sessions, GET /sessions/{id}/stream (SSE), POST /sessions/{id}/anchor, DELETE /sessions/{id}. No admin/debug endpoints in production |

### 4. Visual Odometry (cuVSLAM)

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Detect camera feed tampering | LOW | Sanity checks on frame consistency | If consecutive frames show implausible motion (>500m displacement at 3fps), flag as suspicious. ESKF covariance spike triggers satellite re-localization |
| Protect against VO poisoning | LOW | Cross-validate VO with IMU | ESKF fusion inherently cross-validates: IMU and VO disagreement raises covariance, triggers satellite matching. No single sensor can silently corrupt position |

### 5. Satellite Image Matching

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Verify tile integrity | MEDIUM | SHA-256 checksums per tile | During offline preprocessing: compute SHA-256 for each tile pair. Store checksums in signed manifest. At runtime: verify checksum on tile load |
| Prevent adversarial tile injection | MEDIUM | Signed tile manifest | Offline tool signs manifest with private key. Jetson verifies signature with embedded public key before accepting tile set |
| Detect satellite match outliers | MEDIUM | RANSAC inlier ratio threshold | If RANSAC inlier ratio <30%, reject match as unreliable. ESKF treats as no-measurement rather than bad measurement |
| Protect against ground-based adversarial patterns | VERY LOW | Multi-tile consensus | Match against multiple overlapping tiles. Physical adversarial patches affect local area — consensus voting across tiles detects anomalies |

### 6. Sensor Fusion (ESKF)

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Prevent single-sensor corruption of position | HIGH | Adaptive noise + outlier rejection | Mahalanobis distance test on each measurement. Reject updates >5σ from predicted state. No single measurement can cause >50m position jump |
| Detect systematic drift | MEDIUM | Satellite matching rate monitoring | If satellite matches consistently disagree with VO by >100m, flag integrity warning to operator |
| Protect fusion state | LOW | In-memory only, no persistence | ESKF state never written to disk. Lost on power-off — no forensic recovery |

### 7. Offline Preprocessing (Developer Machine)

| Requirement | Risk Level | Control | Implementation |
|-------------|-----------|---------|----------------|
| Protect Google Maps API key | MEDIUM | Environment variable, never in code | `.env` file excluded from version control. API key used only on developer machine, never deployed to Jetson |
| Validate downloaded tiles | LOW | Source verification | Download only from Google Maps Tile API via HTTPS. Verify TLS certificate chain |
| Secure tile transfer to Jetson | MEDIUM | Signed + encrypted transfer | Transfer tile set + signed manifest via encrypted channel (SCP/SFTP). Verify manifest signature on Jetson before accepting |

## Security Controls Summary

### Authentication & Authorization

- **Mechanism**: Pre-shared JWT secret between ground station and Jetson
- **Scope**: All API endpoints require valid JWT bearer token
- **Session model**: One JWT per flight session, expires at session end
- **No user management on Jetson** — single-operator system, auth is device-to-device

### Data Protection

| State | Protection | Tool |
|-------|-----------|------|
| At rest (Jetson storage) | LUKS full-disk encryption | JetPack LUKS + OP-TEE |
| In transit (SSE stream) | TLS 1.3 | Uvicorn SSL |
| In memory (ESKF state) | No persistence, cleared on session end | Application logic |
| On capture (emergency) | Tamper-triggered LUKS key erase | Hardware dead-man switch + `cryptsetup luksErase` |

### Secure Communication

- Ground station ↔ Jetson: TLS 1.3 (self-signed cert, pre-installed)
- No internet connectivity during flight — no external attack surface
- RF link security is out of scope (handled by UAV communication system)

### Logging & Monitoring

| What | Where | Retention |
|------|-------|-----------|
| API access logs (request count, errors) | In-memory ring buffer | Current session only, not persisted |
| Security events (auth failures, integrity warnings) | In-memory + SSE alert to operator | Current session only |
| Position history | In-memory for refinement, SSE to ground station | NOT persisted on Jetson after session end |
| Crash/tamper events | Trigger secure erase, no logging | N/A — priority is data destruction |

**Design principle**: Minimize data persistence on Jetson. The ground station is the system of record. Jetson stores only what's needed for the current flight — satellite tiles (encrypted at rest) and transient processing state (memory only).

## Protected Code Execution (OP-TEE / ARM TrustZone)

### Overview

The Jetson Orin Nano Super supports hardware-enforced protected code execution via **ARM TrustZone** and **OP-TEE v4.2.0** (included in Jetson Linux 36.3+). TrustZone partitions the processor into two isolated worlds:

- **Secure World** (TEE): Runs at ARMv8 secure EL-1 (OS) and EL-0 (apps). Code here cannot be read or tampered with from the normal world. OP-TEE is the secure OS.
- **Normal World**: Standard Linux (JetPack). Our Python application, cuVSLAM, FastAPI all run here.

Trusted Applications (TAs) execute inside the secure world and are invoked by Client Applications (CAs) in the normal world via the GlobalPlatform TEE Client API.

### Architecture on Jetson Orin Nano

```
┌─────────────────────────────────────────────────┐
│          NORMAL WORLD (Linux / JetPack)          │
│                                                   │
│  Client Application (CA)                          │
│  ↕ libteec.so (TEE Client API)                   │
│  ↕ OP-TEE Linux Kernel Driver                    │
│  ↕ ARM Trusted Firmware (ATF) / Monitor          │
├─────────────────────────────────────────────────┤
│          SECURE WORLD (OP-TEE v4.2.0)            │
│                                                   │
│  OP-TEE OS (ARMv8 S-EL1)                        │
│  ├── jetson-user-key PTA (key management)        │
│  ├── luks TA (disk encryption passphrase)        │
│  ├── hwkey-agent TA (encrypt/decrypt data)       │
│  ├── PKCS #11 TA (crypto token interface)        │
│  └── Custom TAs (our application-specific TAs)   │
│                                                   │
│  Hardware: Security Engine (SE), HW RNG, Fuses   │
│  TZ-DRAM: Dedicated memory carveout              │
└─────────────────────────────────────────────────┘
```

### Key Hierarchy (Hardware-Backed)

The Jetson Orin Nano provides a hardware-rooted key hierarchy via the Security Engine (SE) and Encrypted Key Blob (EKB):

```
OEM_K1 fuse (256-bit AES, burned into hardware, cannot be read by software)
    │
    ├── EKB_RK (EKB Root Key, derived via AES-128-ECB from OEM_K1 + FV)
    │   ├── EKB_EK (encryption key for EKB content)
    │   └── EKB_AK (authentication key for EKB content)
    │
    ├── HUK (Hardware Unique Key, per-device, derived via NIST-SP-800-108)
    │   └── SSK (Secure Storage Key, per-device, generated at OP-TEE boot)
    │       ├── TSK (TA Storage Key, per-TA)
    │       └── FEK (File Encryption Key, per-file)
    │
    └── LUKS passphrase (derived from disk encryption key stored in EKB)
```

Fuse keys are loaded into SE keyslots during early boot (before OP-TEE starts). Software cannot read keys from keyslots — only derive new keys through the SE. After use, keyslots should be cleared via `tegra_se_clear_aes_keyslots()`.

### What to Run in the Secure World (Our Use Cases)

| Use Case | TA Type | Purpose |
|----------|---------|---------|
| **LUKS disk encryption** | Built-in `luks` TA | Generate one-time passphrase at boot to unlock encrypted rootfs. Keys never leave secure world |
| **Tile manifest verification** | Custom User TA | Verify SHA-256 signatures of satellite tile manifests. Signing key stored in EKB, accessible only in secure world |
| **JWT secret storage** | Custom User TA or `hwkey-agent` TA | Store JWT signing secret in EKB. Sign/verify JWTs inside secure world — secret never exposed to Linux |
| **Secure erase trigger** | Custom User TA | Receive tamper signal → invoke `cryptsetup luksErase` via CA. Key erase logic runs in secure world to prevent normal-world interference |
| **TLS private key protection** | PKCS #11 TA | Store TLS private key in OP-TEE secure storage. Uvicorn uses PKCS #11 interface to perform TLS handshake without key leaving secure world |

### How to Enable Protected Code Execution

#### Step 1: Burn OEM_K1 Fuse (One-Time, Irreversible)

```bash
# Generate 256-bit OEM_K1 key (use HSM in production)
openssl rand -hex 32 > oem_k1_key.txt

# Create fuse configuration XML with OEM_K1
# Burn fuse via odmfuse.sh (IRREVERSIBLE)
sudo ./odmfuse.sh -i <fuse_config.xml> <board_name>
```

After burning `SecurityMode` fuse (`odm_production_mode=0x1`), all further fuse writes are blocked. OEM_K1 becomes permanently embedded in hardware.

#### Step 2: Generate and Flash EKB

```bash
# Generate user keys (disk encryption key, JWT secret, tile signing key)
openssl rand -hex 16 > disk_enc_key.txt
openssl rand -hex 32 > jwt_secret.txt
openssl rand -hex 32 > tile_signing_key.txt

# Generate EKB binary
python3 gen_ekb.py -chip t234 \
  -oem_k1_key oem_k1_key.txt \
  -in_sym_key uefi_enc_key.txt \
  -in_sym_key2 disk_enc_key.txt \
  -in_auth_key uefi_var_auth_key.txt \
  -out eks_t234.img

# Flash EKB to EKS partition
# (part of the normal flash process with secure boot enabled)
```

#### Step 3: Enable LUKS Disk Encryption

```bash
# During flash, set ENC_ROOTFS=1 to encrypt rootfs
export ENC_ROOTFS=1
sudo ./flash.sh <board_name> <storage_device>
```

The `luks` TA in OP-TEE derives a passphrase from the disk encryption key in EKB at boot. The passphrase is generated inside the secure world and passed to `cryptsetup` — it never exists in persistent storage.

#### Step 4: Develop Custom Trusted Applications

Cross-compile TAs for aarch64 using the Jetson OP-TEE source package:

```bash
# Build custom TA (e.g., tile manifest verifier)
make -C <ta_source_dir> \
  CROSS_COMPILE="<toolchain>/bin/aarch64-buildroot-linux-gnu-" \
  TA_DEV_KIT_DIR="<optee_src>/optee/build/t234/export-ta_arm64/" \
  OPTEE_CLIENT_EXPORT="<optee_src>/optee/install/t234/usr" \
  TEEC_EXPORT="<optee_src>/optee/install/t234/usr" \
  -j"$(nproc)"

# Deploy: copy TA to /lib/optee_armtz/ on Jetson
# Deploy: copy CA to /usr/sbin/ on Jetson
```

TAs conform to the GlobalPlatform TEE Internal Core API. Use the `hello_world` example from `optee_examples` as a starting template.

#### Step 5: Enable Secure Boot

```bash
# Generate PKC key pair (use HSM for production)
openssl genrsa -out pkc_key.pem 3072

# Sign and flash secured images
sudo ./flash.sh --sign pkc_key.pem <board_name> <storage_device>

# After verification, burn SecurityMode fuse (IRREVERSIBLE)
```

### Available Crypto Services in Secure World

| Service | Provider | Notes |
|---------|----------|-------|
| AES-128/256 encryption/decryption | SE hardware | Via keyslot-derived keys, never leaves SE |
| Key derivation (NIST-SP-800-108) | `jetson-user-key` PTA | Derive purpose-specific keys from EKB keys |
| Hardware RNG | SE hardware | `TEE_GenerateRandom()` or PTA command |
| PKCS #11 crypto tokens | PKCS #11 TA | Standard crypto interface for TLS, signing |
| SHA-256, HMAC | MbedTLS (bundled in optee_os) | Software crypto in secure world |
| RSA/ECC signing | GlobalPlatform TEE Crypto API | For manifest signature verification |

### Limitations on Orin Nano

| Limitation | Impact | Workaround |
|-----------|--------|------------|
| No RPMB support (only AGX Orin has RPMB) | Secure storage uses REE FS instead of replay-protected memory | Acceptable — LUKS encryption protects data at rest. REE FS secure storage is encrypted by SSK |
| EKB can only be updated via OTA, not at runtime | Cannot rotate keys in flight | Pre-provision per-device unique keys at manufacturing time |
| OP-TEE hello_world reported issues on some Orin Nano units | Some users report initialization failures | Use JetPack 6.2.2+ which includes fixes. Test thoroughly on target hardware |
| TZ-DRAM is a fixed carveout | Limits secure world memory | Keep TAs lightweight — only crypto operations and key management, not data processing |

### Security Hardening Checklist

- [ ] Burn OEM_K1 fuse with unique per-device key (via HSM)
- [ ] Generate and flash EKB with disk encryption key, JWT secret, tile signing key
- [ ] Enable LUKS full-disk encryption (`ENC_ROOTFS=1`)
- [ ] Modify `luks-srv` to NOT auto-decrypt (require explicit trigger or dead-man switch)
- [ ] Burn SecurityMode fuse (`odm_production_mode=0x1`) — enables secure boot chain
- [ ] Burn debug-disable fuses — disables JTAG
- [ ] Configure anti-rollback ratchet fuses
- [ ] Clear SE keyslots after EKB extraction via `tegra_se_clear_aes_keyslots()`
- [ ] Deploy custom TAs for JWT signing and tile manifest verification
- [ ] Use PKCS #11 for TLS private key protection
- [ ] Test secure erase trigger end-to-end
- [ ] Run `xtest` (OP-TEE test suite) on production Jetson to validate TEE

## Key Security Risks

| Risk | Severity | Mitigation Status |
|------|---------|-------------------|
| Physical capture → data extraction | CRITICAL | Mitigated by LUKS + secure erase. Residual risk: attacker extracts RAM before erase triggers |
| No auto-decrypt bypass for LUKS | HIGH | Requires custom `luks-srv` modification — development effort needed |
| Self-signed TLS certificates | MEDIUM | Acceptable for field deployment. Certificate pinning on ground station prevents MITM |
| cuVSLAM is closed-source | LOW | Cannot audit for vulnerabilities. Mitigated by running in sandboxed environment, input validation on camera frames |
| Dead-man switch reliability | HIGH | Hardware integration required. False triggers (temporary signal loss) must NOT cause premature erase. Needs careful threshold tuning |

## References
- xT-STRIDE threat model for UAVs (2025): https://link.springer.com/article/10.1007/s10207-025-01082-4
- NVIDIA Jetson OP-TEE Documentation (r36.4.4): https://docs.nvidia.com/jetson/archives/r36.4.4/DeveloperGuide/SD/Security/OpTee.html
- NVIDIA Jetson Security Overview (r36.4.3): https://docs.nvidia.com/jetson/archives/r36.4.3/DeveloperGuide/SD/Security.html
- NVIDIA Jetson LUKS Disk Encryption: https://docs.nvidia.com/jetson/archives/r36.4.4/DeveloperGuide/SD/Security/DiskEncryption.html
- NVIDIA Jetson Secure Boot: https://docs.nvidia.com/jetson/archives/r36.4.4/DeveloperGuide/SD/Security/SecureBoot.html
- NVIDIA Jetson Secure Storage: https://docs.nvidia.com/jetson/archives/r36.4.3/DeveloperGuide/SD/Security/SecureStorage.html
- NVIDIA Jetson Firmware TPM: https://docs.nvidia.com/jetson/archives/r36.4.3/DeveloperGuide/SD/Security/FirmwareTPM.html
- NVIDIA Jetson Rollback Protection: https://docs.nvidia.com/jetson/archives/r36.4.3/DeveloperGuide/SD/Security/RollbackProtection.html
- Jetson Orin Fuse Specification: https://developer.nvidia.com/downloads/jetson-agx-orin-series-fuse-specification
- OP-TEE Official Documentation: https://optee.readthedocs.io/en/latest/
- OP-TEE Trusted Application Examples: https://github.com/linaro-swg/optee_examples
- RidgeRun OP-TEE on Jetson Guide: https://developer.ridgerun.com/wiki/index.php/RidgeRun_Platform_Security_Manual/Getting_Started/TEE/NVIDA-Jetson
- GlobalPlatform TEE Specifications: https://globalplatform.org/specs-library/?filter-committee=tee
- Model Agnostic Defense against Adversarial Patches on UAVs (2024): https://arxiv.org/html/2405.19179v1
- FastAPI Security Best Practices (2026): https://fastlaunchapi.dev/blog/fastapi-best-practices-production-2026